866-753-7254

Vermeer Vacuum Excavators

We pride ourselves on truck vacuum equipment and technology that are among the best in the world. All components in models like our VXT500, with its 8-yd spoil tank capacity, are market-tested and some of the highest quality in the industry.

The new VXT300 series of truck vacs is designed for contractors focused on fast and reliable vacuum excavation from jobsites to dumpsites. The VXT300 series is available in an 8-yd³ (6.1-m³) spoil tank capacity with 800-gal (3,028-L) water tank capacity. Meet project deadlines using the productive 6-in (15.2-cm) PTO-driven truck vac with 3,500-cfm (99.1-m³/min) “free air” and is capable of 18 in Hg (.6 bar) 

  • 10gpm (37.9 L/min) high pressure pump flow rate
  • 75 ft (22.9 m) high pressure hose length
  • Electronic display with 7-in (17.8-cm) LCD screen gauge
  • 335-degree boom rotation 
  • Full-function wireless remote control (optional belly pack or handheld)

Vermeer VXT600

Two VXT600 models offer two different tank sizes. Choose from an 11-cu yd debris tank with 1,300-gal water capacity or a 16-cu yd debris tank with 2,400-gal of water capacity in the central tank. Both sizes feature a built-in 10-degree floor slope along with a three-stage lift cylinder and a full radius half-moon rear door for efficient unloads. They also feature the powerful Jurop Helix 6400-cfm PD Blower driven by the OMSI transfer case with blower soft-start engagement.

  • 1,300-gal or 2,400-gal water tank
  • 6400 cfm @ 27 hg
  • OMSI 500-hp T-Case with clutch packs
  • Easy Kleen 420K BTU diesel fired boiler
  • SCANRECO rocket flex remote
  • Pratissoli 4000-psi @ 19.2-gpm water pump
  • IFM can bus control/monitoring system
  • 10-in air system throughout
  • ICS dual silencers for quiet operation
  • 10-degree slope floor with hoist cylinder
  • 23-ft to 30-ft boom reach with 8-in hose system
  • Heated cabinets and water tanks

Vermeer VXT500

The VXT500 truck vac has 8-cu yds of debris capacity and 850-gallons of water. The truck’s engine, through an OMSI soft start transmission, powers a 4,800-cfm @ 27 hg vacuum blower and 13-gpm @ 3000-psi water system. The 54,000 GVWR rated axle configuration allows for maximum utilization of the 8-yd spoil tank.

  • 3 rear axles for maximum load
  • Lifting cylinder – full radius half-moon rear door, 10-degree slope floor
  • 18-ft boom with 8-in hose with extended pivot
  • OMSI transmission with soft-start blower engagement
  • SCANRECO rocket wireless remote transmitter/receiver for reliable connectivity


The Vermeer XR2 vacuum excavator is the industry’s first vacuum excavator equipped with a shaker deck that separates liquids and solids to allow contractors to stay on the jobsite longer, work efficiently and reduce disposal expenses. Material excavated with the XR2 is fed through an onboard deceleration tank that exits through an airlock onto a shaker deck where solids and liquids are then separated. The solid material is moved by conveyor toward the rear of the machine where it is discharged and can be carried away or left on the jobsite, depending on the material. Used, slurry water is pumped into the fluid storage tanks for disposal. 
  • 4 tank capacity at 500-gal each
  • 1,500-gal maximum water capacity
  • 3,000-psi maximum pressure
  • 252-in maximum full hydraulic boom reach
  • 3,400 cfm
  • 455-hp truck engine
 
The low profile trailer keeps the components of the unit easily accessible while making the unit safe to tow and putting this series in a league of its own. The LP Series Hydro Excavator has all the power needed to excavate a variety of wet and dry material safely. The hydro excavator units come equipped with a hydraulic rear door, which opens fully so the operator can completely empty the contents. The LP Series offers the patented filtration system that is unmatched by our competitors. It also comes standard with a reverse pressure system and a heavy-duty trailer with Dexter axles.
  • Two 100-gal water tanks with optional 300-gal capacity
  • 38-hp EFI gas engine
  • 1,000 cfm vacuum pump
  • 3-in standard UV protected hose, 4-in option available
  • 500-gal debris tank with hydraulic lift
  • Hydraulically operated full open and locked rear door with auto-engage safety latch
The Vermeer VX50 series is a powerful and productive vacuum excavator, equipped with a 4″ suction hose and 1,025 cfm blower it is extremely useful for production pothole applications and drill fluid management. This third generation Vermeer vacuum excavator by McLaughlin features a 49-horsepower (36.5 kW) Tier 4 Final Kubota diesel engine and has a modular design allowing it to be trailer- or truck-mounted simply and quickly.
  • 1,025 cfm blower
  • 4-in suction hose
  • 49-hp Tier 4 Final Kubota diesel engine
  • Patented high lift “Cam-Over” hydraulic rear door
  • Three-stage cyclonic filtration system
  • Patented in tank washdown
  • Reverse-flow standard option
  • Remote drains
  • High clearance trailer